the decorative horizontal low-temperature valve radiator with serial flow technology, with both a centre and lateral bottom connection and preset valve insert, which can be fitted on the left or right side of the radiator

completely smooth design with a jointless front and recessed black upper grille and side panels

preset Heimeier 4368 valve insert, ECO air vent and blind plugs

The integrated adjustable valve insert is factory-fit on the right side of the radiator, CEN certified, tested in accordance with EN215 and compatible with thermostatic heads M30 x 1,5 mm. The valve insert can also be fitted on the left of the ECO radiator.
The thermostatic valve insert is factory-set in relation to the size of the radiator. This presetting ensures optimum throughput in the radiator. Factory setting for two-pipe systems, also suitable for one-pipe systems (as long as the valve insert is adjusted to position 8).

design thermostatic head, valve insert spindle extension, wall brackets, saddle clips, screws, plugs and installation instructions

2 x ¾” male Eurocone centre connection and 2 x ½” female lateral bottom connection

2 pairs of mounting lugs up to 1.600 mm and 3 pairs from 1.800 mm

Every radiator is sturdily packaged with protective foam-filled bags, in high-quality cardboard and wrapped in plastic. The radiator’s characteristics are shown on the label: type – height – length.

10 years, as long as the installation instructions have been followed and Henrad’s warranty conditions have been met.

All radiators are degreased, phosphated, cataphoretically primed and powder-coated in Henrad SN170 black as standard.

Henrad white 9016 + 35 different Henrad colours and about 200 RAL-colours are possible

SN170 Black

10 bar (tested to 13 bar)

110 °C

in accordance with EN442

21 | 22

545 | 645 mm

670 | 870 | 1.070 | 1.270 | 1.470 | 1.670 | 1.870 | 2.070 mm

96 | 119 mm